Primer and sealer
Estilpur 1C
About this product
Any order over £2000 please contact us for a discount of 10%
Monocomponent water-based aliphatic polyurethane varnish for sealing microcement, self-levelling and parquet floors. Excellent resistance to abrasion. Finish: Satin or Matt.
What it's for
- One-component, water-based polyurethane varnish. Solvent-free.
- Seals microcement, self-levelling and parquet floors, and walls.
- Indoor and outdoor. Does not yellow.
- Excellent abrasion resistance; stands up to household chemicals, water and weather.
Key specs
| Pack sizes | 1L, 5L |
|---|---|
| Finish | Satin or matt. |
| Coats | Two or three, depending on the protection you need. |
| Coverage per coat | 75–100 g/m². |
| Mixing | One component. Shake well. Do not dilute. |
| Drying and recoat | 4 hours between coats (no sanding needed if the next coat goes on within 48 hours). Light traffic after 24 hours. Full resistance after 7 days. |
| Application | Microfibre or short-nap roller, brush or airless spray. |
| Application conditions | 10–30 °C, humidity up to 70%, surface at least 3 °C above dew point. |
| Cleaning | Water, straight after use. |
| Storage and shelf life | About 1 year in the original pack. |
| Safety data sheet | Safety data sheets |
How to use
Prime
On absorbent surfaces, first roll on two coats of Hydrolaca and let them dry for at least 12 hours.
Apply
Shake well and apply two or three coats, 4 hours apart, by roller, brush or airless spray.
Cure
Light traffic after 24 hours. Full resistance after 7 days.
You'll also need
Hydrolaca1L · 5Lfrom £30.00Two coats under the varnish on absorbent surfaces.
Decopast Ready Mix MicrocementBase · Fino · Extra Finofrom £192.00Decopast must be sealed and varnished.
FAQ
Can I use it outdoors?
Yes. Estilpur 1C works indoors and outdoors and does not yellow.
Do I need a mask?
It contains no solvent, so no organic-vapour mask is needed and it can be used in poorly ventilated areas. Wear gloves and goggles. Airless spraying needs full protection and a mask.
Do I sand between coats?
Not if the next coat goes on within 48 hours.
When can I walk on it?
Light traffic after 24 hours; full resistance after 7 days.
Liquid Metal FX
Made by finishers, for finishers
Over 30 years of hands-on experience in high-end finishes. Questions on your project? Talk to us.